Subject | Text |
| [quote:0c9202a23f="ronw_57"]Hook up was with composite cables to get high def picture.[/quote:0c9202 |
| As far as i was aware there wasn't a REAL service manual for this Plasma!
Anyway, I exchanged the |
|
| try to resolder terminals at the power supply section esp. high current devices. |
Electric circuit drawings Printer HP 2015n | Hello,
the main circuit board of my printer HP2015n is dead.
I need detailed drawings of the ele |
| Thank you jts1957 but no, this will not cure the overheat problem.
I tried several LA7845N, sever |
power supply problem and what to replace? | hello,
I have a photographic enlarger with a voltage-controlled transformer. sometimes when i power |
ivtec | My friends i went shopping for a printer and got one very cheap at Walmart, i got a Lexmark Z2300 a |
Re: Sony KV2150R help please with repairing this set. | [quote:e29861f69a="Eduardo O"]The Stand by/timer LED keeps blinking all time, I have changed the ful |
| I am not an expert but to my knowledge you probably won't get a shock from the flyback. The wire and |
Treadmill bollinger | Sorry, for my English.
My tradmill has stopped working, it is always giving the error 04, when |
Optonica rp7100 turntable | Hi all.Has anyone got a service manual or knows of a fix for this problem. The turntable has a direc |
[SERVICE MANUAL REPAIR] MINOLTA AF 300 mm 2.8 HS G | Hi.
I'm new here and I'm looking for the Service Manual Repair for the optical lens Minolta AF 300 |
new cisco ruoter for sale | Cisco WS-SUP720-3B $10500
Cisco WS-SUP720 $8900
Cisco WS-SUP720-3BXL $12600
Cisco WS-SUP32-GE-3B |
Couple of quick checks... | First I would physically look into the picture guns. Powered down of course. You are looking for a m |
| Yikes! Now it's getting complicated! I found the Power Transistors and ordered them through
htt |
| I would still start with checking the voltages on the secundairy part of the power supply.
e.g. D |
| Try looking for a trimmer resistor to adjust the tape speed. |
|
Sony SLV-X810 VHS VCR - Will not rewind | My SLV-X810 will not rewind, either in play mode, after stopping, or by pressing "high speed re |
| Hi m8
Dont know if this will help but my brother had the same problem and Sony replaced the tube |
Sony KV-35v65 hv short | Many people distribute a parts kit for this model of television. It
includes a dual power supply t |
| okay here are the readings from the power print, does not look good.
incoming power is 50 V AC on |
| If you have no experience in tv-repair, YES you should be very carefull when soldering on the inside |
about yourt.v set | well if you have replaced the power supply and you have your 5volt stand by ,there is one other thin |
| [quote:3abd774048="awright"]Well, yeah, you are messing with relatively high power equipment and can |
some tips | Hi did you check menu settings of your tv? ok try press3x channel if does not off... if not, check y |
@Guest | @guest who recommends to replace all caps of the vertical driver unit
Okay, I agree that might be t |
!! RIPOFF !! HHY - HASMUKH SHAH [email protected] | attention,
this guy tries to ripoff people here by trying to sell
the searched manbuals (for ext |
Sony PS-X50 turntable service manual or advice | The speed of this turntable wavers a bit. Any help with which component to check would be great. A m |
How to know the Vcc of a non commercial Ic | I baute a used HITACHI motor it has a shaft encoder - like the one in the mouse that the mouse ball |
Roadstar CD 942 DVD do not read disc | I have problem with this cd audio, some time he read disk some time do not.I tray with new disk and |